Feed In Your First Section
The Basic Curl
What To Do:
Take a small section of hair, about 1/2 to 1" wide (depending on hair thickness).
If you have thick hair start with a 1/2" section. Hold it on a slight angle to the left or right of your head. Place the ends into the open part of the barrel. Press and hold START until the device stops curling.
The barrel will pull the hair in and curl it within seconds. Hold still and wait for the beep. Curler will beep 3 times, release the START button and slowly pull the unit away from your hair. And VOILA beautiful curls!
Why It Matters:
Small sections curl evenly and feed in without snagging. The beep tells you the curl is set, so you never have to guess.
NOTE: DO NOT CURL THE SAME SECTION TWICE WHILE YOUR HAIR IS IN THE CHAMBER
Pro Tips:
The amount of time chosen is what determines loose or tight curls. Push the button ⏻ on the right until the time appears on screen. 08 seconds will give you loose curls and 18 seconds is for tight curls. Press (+/-) button on the left to choose your number.
Push the start button to select "L" for the left side of your head and "R" for the right side of your head. (L or R appears in green at the top of the screen).
Keep the section smooth and flat as it feeds in. A twisted section curls unevenly.
